Seagate Barracuda Green 2TB SATA 6Gb/s 64MB Cache 3.5-Inch Internal Bare Drive ST2000DL003
Seagate has recently discovered that Barracuda 7200.11 family hard drive has a random, unexplained freezing problem that was usually most apparent with hard drive stays BUSY, being detected with 0 in LBA.
There is so much talk about this major problem, some say that if the hard drive powers up, it will be recognized in the system for a few seconds, and soon it shows as "BUSY" "Drive Not Ready", or LBA is detected as 0.Technically speaking, Seagate 7200.11 family has a big capacity up to 1.5 TB of storage. Bearing GMR recording mind technologies provides hard disks with increased recording denseness; in cases like this, a good error-correction formula was developed to keep the actual examine modification and data storage space. SalvationDATA professionals validate that hard push may sequently see the data in P-list and G-list, any time perform over a private investigator checklist. Otherwise, once the examine order been unsuccessful; hard push may rapidly enter a state associated with self-protection, and so the data saved about the disk won't be damaged by other operation problems of the period. Why could cause examine failures will be the mess of information in G-list and P-list, which is the issue exactly where hard drive are going "BUSY" right after powered up.
Nonetheless, there are numerous options available claim they can solve these issues such as disk drive stays "BUSY" and "Drive Not really Ready", or becoming discovered with Zero in LBA, for instance. In fact, they're basically working with the actual "BUSY" concern. Here are the options:
A single. First you have to remove PCB through HDA circumstance and fasten that towards the console package.
2. Consider CMD function, order "Ctrl+Z"; "F3 T>" is going to be result.
Several. Order "/2", turn to Stage 2.
4. Input order "Z" and media Key in to stop spindle electric motor.
Five. Then attach PCB in order to HDA circumstance; don't power off during installation.
Half a dozen. In CMD function, enter order "U" and media "Enter" to start spindle electric motor.
7. Input order "/1" and media "Enter" in order to Stage A single.
8-10. Input order N1and media "Enter".
Nine. Change power don and doff, then your push need to achieve preparedness.
Ten. Then utilize Barracuda 7200.14 hard drive utility associated with programmed reallocation to revive LBA Zero Gigabytes concern.
One other problem in which LBA is discovered since Zero is really a common failure regarding Barracuda 7200.14 hard drive. These kinds of hard disks can be discovered typically however the data area is inaccessible with LBA Zero Gigabytes.
G-list is involving SMART-list. SalvationDATA specialists have recently discovered that any time Barracuda 7200.14 hard disks cope with negative industries, SMART checklist may read/write on every sector, to check if there are genuine negative industries present, shortly will add these negative industries in order to G-list. These types of procedures is going to be noted on SMART Record after that. Typically, In the event that hard disks are now being powered on/off many times any time hard disks are engaged on reading data, consequently, hard drive will get hung a great deal and then SMART checklist is going to be damaged, and also influence on G-list, and so the hard drive is going to be discovered with LBA Zero Gigabytes.
Excellent article. Very interesting to read. I really love to read such a nice article. Thanks! keep rocking. pedicure massage chairs
ReplyDelete